How Can I Fix A Leak In My Pool’s Solar Water Heater?
I have a rooftop solar heater for my pool. Today, when I started pumping water through it, I saw a nice water spray coming from a hole in it. How can I plug that hole?
I have a rooftop solar heater for my pool. Today, when I started pumping water through it, I saw a nice water spray coming from a hole in it. How can I plug that hole?
Is the leak in the panel or the lines to the panel?
The lines to the panel are the easy fix. Just cut the line remove any sharp edges and install a “shark bite” type of fitting per the instructions.
The panel is a little more difficult. If the tubing has movement ( only one end attached ) repair as above. If both ends are secured clean the hole with a fine wire brush or steel wool, drill a small hole, and fill with a two-part epoxy made for metal.
It depends on what material the heater is made out of. If its pvc or rubber pipe, a plumbing supply store will have the plastic welding material you need. You may have to cut out the bad area and put in a new piece. Either way, you’ll probably have to drain the system, then fix it.